Setup > Mac Address Clone - Linksys WRT54GL User Manual

Chapter3
DynDNS.org
Setup > DDNS > DynDNS
System Select the DynDNS service you use: Dynamc,
Statc, or Custom . The default selection is Dynamc .
User Name Enter the User Name for your DDNS account .
Password Enter the Password for your DDNS account .
Host Name
The is the DDNS URL assigned by the DDNS
service .
Mal Exchange (Optonal)
exchange server, so e-mails to your DynDNS address go to
your mail server .
Backup MX This feature allows the mail exchange server
to be a backup . To disable this feature, keep the default,
No . To enable the feature, select Yes . If you are not sure
which setting to select, keep the default, No .
WldCard This setting enables or disables wildcards
for your host . For example, if your DDNS address is
myplace.dyndns.org and you enable wildcards, then
x.myplace.dyndns.org will work as well (x is the wildcard) .
To disable wildcards, keep the default, Off . To enable
wildcards, select On . If you are not sure which setting to
select, keep the default, Off .
Internet IP Address The Router's Internet IP address is
displayed here . Because it is dynamic, it will change .
Status
The status of the DDNS service connection is
displayed here .
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes .
Wreless-G Broadband Router
Enter the address of your mail
Advanced Configuration
TZO.com
Setup > DDNS > TZO
E-mal Address, Password, and Doman Name
the settings of the account you set up with TZO .
Internet IP Address
The Router's Internet IP address is
displayed here . Because it is dynamic, it will change .
Status The status of the DDNS service connection is
displayed here .
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes .
Setup > MAC Address Clone
A MAC address is a 12-digit code assigned to a unique
piece of hardware for identification . Some ISPs will require
you to register a MAC address in order to access the
Internet . If you do not wish to re-register the MAC address
with your ISP, you may assign the MAC address you have
currently registered with your ISP to the Router with the
MAC Address Clone feature .
Setup > MAC Address Clone
MAC Address Clone
Enable/Dsable To have the MAC Address cloned, select
Enable .
User Defned Entry
Enter the MAC Address registered
with your ISP here .
Clone Your PC's MAC Clicking this button will clone the
MAC address of the computer you are using .
Enter
8