Lock Switch - Sangean ATS-405 Manual

Headphones
Headphones for use with this radio should be stereo
and fitted with a 3.5mm stereo jack plug. Insert the
headphone plug into the socket marked on the left hand
side of the radio. When the headphones are plugged in,
the loudspeaker is automatically disconnected.
Note:
before inserting the headphone, make sure radio
volume is set to minimum to avoid damage to the ears.
IMPORTANT:
Excessive sound pressure from earphones and
headphones can cause hearing loss.

Lock Switch

The lock switch is used to prevent unintentional
operation of the radio.
Set the LOCK switch located on the bottom side of the
radio to the ON position. The Lock symbol will appear in the
display with a beep. The power and all other buttons will be
disabled. This will prevent accidental operation when the
radio is packed in a suitcase or carrying pouch. To release
the LOCK, move the LOCK switch to OFF position, the
LOCK symbol will be removed from the display.
GB
29