Sangean ATS-405 Manual page 26

Auto clock time adjustment by RDS-CT
You can enable auto clock time adjustment by RDS
(Radio Data System) CT function. Clock time can be
automatically adjusted by FM RDS station.
Note:
RDS function is mostly available in European countries
and part of Northern America area.
To enable or disable RDS-CT function, Either radio is
ON or OFF, press and hold Menu button until a beep
sounds and display Menu icon appears. Press CT
button 7, display will show OFF (disable CT function).
Using the tuning UP/Down button to cycle through ON
and Off, then press ENTER button to complete CT
enable or disable setting.
Note:
1) If the clock time was not auto adjusted within 24 hours,
the CT icon will disappear.
2) If clock time from local RDS station is not always
correct, you should consider to disable RDS-CT
function.
GB
25