Electrical Connection - Wolf ART Installation And Operating Instrictions

Electrical connection

The electrical connection must only be carried The electrical connection must only be carried
The electrical connection must only be carried The electrical connection must only be carried The electrical connection must only be carried
out by a qualified electrician. out by a qualified electrician. out by a qualified electrician.
out by a qualified electrician. out by a qualified electrician.
Do not
Do not route these cables with mains
Warning
supply cables.
Wire the ART with 2-core cable (minimum cross-
section 0.5 mm²) to the gas fired boiler. Subject
to boiler terminal strip, select one of the adjacent
wiring diagrams.
Telecontrol contact
for eBUS and SCOM
Connection
data cable
e-BUS or SCOM
+ -
1 2
Terminal strip inside the ART base
Replace the ART onto its base and click into place.
When refitting the housing ensure, that the
contact pins on the thermostat are not bent.
6
3 4
Plug to the
5 6
top part
Connection version a)
+ -
1 2
Connection version b)
+ -
1 2
Connection version c)
+ -
1 2
ART terminal
strip
Terminal strip
on the gas
fired boiler
ART terminal strip
Terminal strip
on the gas
fired boiler
ART terminal strip
Terminal strip
!
on the gas
fired boiler