Installation - Acer CB240HYK User Manual

Installation

To install the monitor on your host system, please follow the steps below:
Steps
1 Connect the video cable
a Make sure both the monitor and computer are switched off.
b Connect the digital cable (only for dual-input models).
(1) Make sure both the monitor and computer are switched off.
(2) Connect one end of the 24-pin DVI(Dual Link) cable to the back of the
monitor and the other end to the computer's port.
c Connect the digital cable (only for DP models).
(1) Make sure both the monitor and computer are switched off.
(2) Connect one end of the 20-pin DP cable to the back of the monitor and the
other end to the computer's port.
d HDMI Cable (Only HDMI or MHL Input Model)
(1) Make sure both the monitor and computer are powered-OFF.
(2) Connect the HDMI or MHL cable to the computer.
2 Connect the power cord
Connect the power cord to the monitor, then to a properly grounded AC outlet.
3 Optional:Connect the audio input socket(AUDIO IN) of the LCD monitor and the line-
out port on the computer with the audio cable.
4 Turn on the monitor and computer
Turn on the monitor first, then the computer. This sequence is very important.
5 If the monitor does not function properly, please refer to the troubleshooting section
to diagnose the problem.
In order to prevent damage to the monitor, do not lift the monitor by its base.
AUDIO
AUDIO IN
DP
HDMI
DVI(Dual Link)
9