Cooling Water Strainer; Checking Of The Cooling Water Strainer; Cleaning Of The Cooling Water Strainer; Check Once Again - Craftsman CM2.12 Operation Manual

Table of Contents

Each day, prior to starting the engine, make sure that

the cooling water strainer is not clogged by dirt. Close

the raw water seacock and remove the cover from the

filter housing for proper inspection.

craftsman marine diesel engines CM2.12 , cm2.16 / cm3.27

Clean the filter element at least twice a year, or

whenever necessary. If the cooling water strainer gets

clogged up, the cooling liquid in the engine may

overheat.

When closing the strainer gain, make sure that the

cover is perfectly shutting the unit off. If and when air

is sucked into the system, on account of a badly

closing filter cover, there is a severe risk of overhea-

ting of the engine.

Maintenance and inspection 11

Cooling water strainer

Make absolutely sure that the cover fits the strainer

housing well and without any air leaks!

Table of Contents

Cm2.16 Cm3.27