Figure 5-23: Wpa2 Mixed Mode Settings Screen - Linksys WAP54G User Manual

Wireless-G Access Point
WPA2 Mixed Mode
To use WPA2 Mixed Mode security, select WPA2 Mixed Mode from the Security drop-down menu. WPA2
Mixed Mode uses TKIP and AES for encryption. Enter a Passphrase that is 8-32 characters in length.
Encryption - The default for WPA2 Personal, TKIP +AES, is automatically selected.
Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-32 characters in the Passphrase field.
The longer and more complex your Passphrase is, the more secure your network will be.
Click the Next button to continue or the Back button to return to the previous screen.
WPA Enterprise
If you want to use WPA-Enterprise, then you should select Disabled and use the Access Point's Web-based
Utility to configure your wireless security settings. (Refer to "Chapter 7: Configuring the Wireless-G Access
Point.") Click the Next button and proceed to step 5.
Linksys Wireless Guard
This subscription service gives you WPA Enterprise security without the work of building your own RADIUS
server. Click Learn more to visit www.linksys.com/wirelessguard.
If you want to use the Linksys Wireless Guard service, select Linksys Wireless Guard. Click the Next button
and proceed to the next section, "Configuring the Linksys Wireless Guard Settings."
Chapter 5: Setting up the Wireless-G Access Point
Using the Setup Wizard

Figure 5-23: WPA2 Mixed Mode Settings Screen

radius (remote authentication dial-in user service): a
protocol that uses an authentication server to control
network access.
20