Table of Contents
Advertisement
Broadband Router with 2 Phone Ports
Enable/Disable. To use port-based QoS, select Enable. Otherwise, keep the default, Disable.
For each port, specify the Priority, Flow Control setting, and Ingress Rate Limit.
Priority. Select the port's priority level, High or Low.
Flow Control. If you want the Router to control the transmission of data between network devices, select Enable.
To disable this feature, select Disable.
Ingress Rate Limit. This setting limits the incoming bandwidth. To use this feature, select 8M, 4M, 2M, 1M,
512K, 256K, or 128K (M stands for Mbps, while K stands for kbps). If you do not want to use this feature, keep
the default, Disable.
Voice QoS
This setting allows you to limit the outgoing bandwidth for the application- or port-based QoS policies in use, so
you can control how much bandwidth a particular application is allowed to use.
Enable/Disable. To limit outgoing bandwidth for the QoS policies in use, select Enable. Otherwise, select
Disable.
QoS Upstream Rate. If you want the Router to automatically detect the QoS upstream rate, keep the default,
Auto Detect. The rate will be automatically displayed. If you want to manually set the maximum QoS upstream
rate, select Manual. Then enter the maximum speed in kbps; the default is 256 kbps.
When you have finished making changes to this screen, click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes. Help information is shown on the right-hand side of a
screen. For additional information, click More.
Chapter 5: Configuring the Router
38
The Applications & Gaming Tab - DMZ
Advertisement
Table of Contents
