Setting Up Your Amplifier; Basic Connection; Overview - Gato Audio DPA-4004 User Manual

Setting up your amplifier

Basic connection

Follow these steps for setting up your system in this sequence:
1. Place the DPA-4004 as per the instructions on page 4
2. Connect all inputs to the amplifi er
3. Connect your loudspeakers to the amplifi er
4. Connect mains power cable to the amplifi er and turn it on
5. Enjoy!
PLEASE NOTE: It is only possible to use either XLR or RCA for each channel! Connecting both XLR and RCA inputs at the same time
in the same channel may damage the amplifi er or the connected equipment.

Overview

Mains
switch
Page 6
Gato Audio DPA-4004 - 4 Channel Power Amplifier
Mains Fuse
socket compartment
Mains
Neutral
Made in
Denmark
Link
Live
DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL.
12 V trigger
Ch 4 + Ch 3 + Ch 2
Ch 3 Ch 4 Bal Ch 3 Bal Ch 1
Ch 4 Ch 2
Bridge
Ch 3-4
TO REDUCE THE RISK OF ELECTRICAL
SHOCK OR FIRE, DO NOT EXPOSE THIS
APPLIANCE TO MOISTURE OR RAIN.
Analogue Balanced
inputs inputs
XLR female pin out
Pin2 + Pin1 Shield
Pin3 −
Channel read-out
DPA-4004
4 pairs of speaker
terminals
+ Ch 1 +
Ch 2 Bal Ch 1 Bal
Display
Bridge
Ch 1-2
Bridge Display setting
switch