Table of Contents
Advertisement
Configuring the Switch
Overview
The Switch's menu-driven configuration program may be configured using
the local console, a Web browser, telnet, or SNMP/RMON. The remote man-
agement methods can be used once the IP parameters have been set via the
local console.
Logging On to the Switch
When logging on to the Switch, you will receive the following screen prompt:
User Name:
Password:
Enter the default User Name ("admin"), and press Enter. Do not enter any-
thing for the Password, and press Enter.
When you select User Configuration from the Management Setup Menu
(discussed later in this User Guide), you will be allowed to define a new
administrator password.
12
EtherFast
Series
EtherFast
®
Main Menu
After you log on to the Switch, the Main Menu screen will appear.
The Main Menu screen consists of a series of options. Each option leads you
to the screen for that management setting. Highlighting any option selects it;
pressing the Enter key takes you to that screen.
To navigate through the Console Interface, use the Tab or arrow keys to
move, the Enter key to select, and the Esc key to return to the previous selec-
tion. Scroll through choices using the spacebar. Options for the currently
selected item are displayed in the highlighted area at the bottom of the inter-
face screen.
The text string in the top right corner of the screen shows if the Switch is
operating as a Layer 2 switch or as a multilayer routing switch.
• System Information Menu - Displays a basic description of the switch,
• Management Setup Menu - Adjust the communication parameters, ensur-
• Device Control Menu - Controls a broad range of functions, including
Managed 24-Port with Dual Gigabit Switch
®
including contact information and hardware and firmware versions.
ing a reliable connection.
port mode, port mirroring, port trunking, spanning tree, VLANs, IP sub-
nets, multicast filtering, and routing protocols.
13
Advertisement
Table of Contents
