Love N Care charlichair Instruction Manual page 6

assembly
1
Place the leg support onto the holder on
the U-shaped base. Push in the button to
slide it onto the holder. Move it into place
until the button comes out of the leg
support
3
Place the asjustable leg support onto the
holder on the leg support bar. Select the
height required by the bar and push in the
button to slide it onto the holder. Move it
into place until the button comes out of the
leg support
2
Repeat for the other side. The Assembled
leg support on the base should look like this.
4
Repeat for the other side. The Assembled
Adjustable leg supports on the base should
look like this.