Logitech Protection+ Power Quick Start Manual page 5

Battery
• The protection [ + ] power pack has 1800 mAh
of power.
• To recharge your protection [ + ] power, connect
the micro USB cable to the bottom of your battery
pack. The USB cable can be plugged in to your
computer or any power source with a USB port.
The LEDs located on the back of the device will
show you the charge progress or completion.
• When your iPhone 5/5s and the protection [ + ]
power are coupled and on, your iPhone 5/5s will
always use the [ + ] power battery pack before
depleting your iPhone 5/5s battery.
FAQ:
• What do the LEDs mean?
The LEDs on the back of your case can help you
check the strength of your protection [ + ] power
battery pack.
• How many times can I charge
my protection [ + ] power pack?
The protection [ + ] power pack is rechargeable for
over 500 full cycles. Partial cycles, like charging
from 30% to 100% will not count as a full cycle
until all of the partials equal 100%. A full cycle is
from 0% to 100%. After 500 cycles, the battery
could lose some of its energy capacity.
This is standard with lithium batteries.
• How do I turn the case on?
A short press turns the case on when coupled
with the phone. Subsequent short presses while
the case is on will illuminate the power level on
the LEDs. A 3 second press will turn the case off.
The case will turn off automatically anytime your
iPhone battery reaches 100%.
English 5