Creating A New Profile - Linksys WPC11 User Manual

Creating a New Profile

1. On the Profiles screen, shown in Figure 7-10, click the New button to cre-
ate a new profile.
2. When the Create connection profile screen (Figure 7-11) appears, enter a
name for the new profile. Click OK to save the profile name or click
Cancel to return to the previous screen.
21
Instant Wireless
Figure 7-10
Figure 7-11
Series Wireless-B Notebook Adapter
®
2. The Choose a wireless mode screen (Figure 7-12) shows a choice of two
wireless modes. Click the Infrastructure Mode radio button if you want
your wireless computers to communicate with computers on your wired
network via a wireless access point. Click the Ad-Hoc Mode radio button
if you want multiple wireless computers to communicate directly with each
other. Click the Next button to continue or the Back button to return to the
previous screen.
Infrastructure Mode - This mode allows wireless and wired networks to
communicate through an access point.
Ad-Hoc Mode - This mode allows wireless-equipped computers to com-
municate directly with each other. No access point is used.
Figure 7-12
22