Page 2
Product features and specifications are subject to change without prior notice. xG® and xMax® are registered trademarks of xG Technology, Inc. All other trademarks used herein are property of their respective owners. For the latest product documentation and software updates, please refer to our Web site at www.xGTechnology.com/support...
FCC Compliance ........................7 RF Exposure ..........................8 Connecting the CN3200 Dual Band Routing Modem to the xMax Network ....9 Connecting Wireless Devices to the xMax Network ..........10 Wired Internet Connectivity and Setting Up a WiFi Hotspot ........11 Wired Internet Connectivity ....................
Page 4
THIS PAGE INTENTIONALLY LEFT BLANK Dual Band Routing Modem - Quick Start Guide - G7603 - Release 2.0...
Ethernet port access to the xMAX network. When paired with a WiFi hotspot it provides access to the xMAX network to WiFi enabled devices. The CN3200 Modem is totally protected against dust and moisture.
The CN3200 Modem is a Power-over-Ethernet (PoE+) device. The IEEE 802.3at PoE+ standard enables transmission of both data and the power to operate a device over a single Cat5/5e/6 cable connection. The CN3200 Modem REQUIRES a PoE++ adaptor, as supplied.
These notices apply to the CN3200 Dual Band Routing Modem. Be sure to read, understand and follow these instructions. Heed all warnings. Only use accessories and attachments specified by xG Technology. Keep a copy of these instructions for future reference.
Changes or modifications to this device not expressly approved by xG Technology could void the user’s authority to operate the equipment and void the product warranty. Dual Band Routing Modem - Quick Start Guide - G7603 - Release 2.0...
IMPORTANT Before you begin this step, it is assumed that the CN3200 Dual Band Routing Modem has been configured as described in the CN3200 Dual Band Routing Modem Installation Guide. This was completed by the device installer. These steps connect the CN3200 Modem to an xMax network.
When within range of a WiFi router connected to the CN3200 Dual Band Routing Modem, any Internet-ready device has the ability to securely connect to the Internet through the xMax Network. These steps connect WiFi devices to the xMax Network.
CN3200 Dual Band Routing Modem for Internet access. 1. Configure the device network interface for DHCP operation. 2. Using an Ethernet cable, connect the device to the CN3200 Dual Band Routing Modem. The CN3200 Modem can be used to create a WiFi hotspot.
xMax RADIO Tx Power Output AVG: RANGE: 5 to 24 dBm in 1 dB steps Receiver Sensitivity -100 dBm BPSK / -90 dBm QAM64 2.4 GHz RADIO Tx Power Output AVG: 8.5 to 21 dBm in 1 dB steps Tx Power Output AVG: Receiver Sensitivity -93 dBm BPSK / -74 dBm QAM64 SYSTEM OVERVIEW...
Resellers, and is not assignable or transferable to any subsequent purchaser or end- user. xG’s warranty applies only to a Product that is manufactured by or for xG Technology and is identified within xG’s price book at time of purchase . Any products not covered by xG’s warranty,...
Customer is responsible for shipment to xG (or authorized service provider) and assumes all costs and risks associated with this transportation; return shipment to the Customer will be at xG’s expense. Customer shall be responsible for return shipment charges for Product returned where xG determines there is no defect ("No Defect Found"), or for Product returned that xG determines is not eligible for warranty repair.
OBTAINING SERVICE AND SUPPORT UNDER WARRANTY To obtain warranty service or technical support, please contact the party from whom you purchased the product. If you purchased the product directly from xG, contact your xG Sales Representative or call 754-206-4800. To take advantage of this Limited Warranty Purchasers are required to supply an original point of purchase receipt.