Use - Miele HS07 Operating Instructions Manual

en
Using the accessories sup‐
plied (dia. 07)
Accessory clip

Crevice nozzle

 Upholstery nozzle
Accessory clip (dia. 08)
(depending on model)
 If required, attach the accessory clip
to the suction tube.
 Push the accessory clip down over
the cable hook ring until it clicks into
position.
The accessory clip holds the accesso‐
ries (dia. 09).
Some models are supplied as standard
with one of the following accessories
which are not illustrated.
– Electrobrush
– Turbobrush
These are supplied with their own oper‐
ating instructions.

Use

Unwind the mains cable (dia. 10)
The lower cable hook swivels round.
 Turn it upwards so that the cable can
be removed easily.
To adjust the telescopic tube (dia. 11)
(depending on model)
One part of the telescopic tube is
packed inside the other and can be ad‐
justed to suit your height for comforta‐
ble vacuum cleaning.
36
 Press the release button to release
the tubes and adjust to the required
height.
Switch the vacuum cleaner on
(dia. 12)
 Plug the vacuum cleaner into a sui‐
table switched socket.
 When vacuuming hang the cable over
the cable hook on the handle (see
detail).
This way the mains cable will not get in
the way during vacuuming. This also
takes the strain off the cable-entry on
the vacuum cleaner.
Switching on and off (dia. 13 + 14)
There are two separate switches on the
carrying handle to enable the vacuum
cleaner to be conveniently operated in
any vacuum-cleaning situation.
Double slide switch
0 = Vacuum cleaner is switched off
min. = Reduced suction
max. = Maximum suction
Select min. for vacuuming lightweight
items such as curtains or rugs.
Select max. if using a turbobrush.
 To switch the vacuum cleaner on,
slide either switch to max.
 To switch the vacuum cleaner off,
push the slide switch to 0 until it
clicks.
Using the hard floorbrush
(depending on model)