Chapter 3: Getting To Know The Wireless-B Ethernet Bridge; The Back Panel; Figure 3-1: Back Panel - Linksys WET11 User Manual

Wireless-B Ethernet Bridge

Chapter 3: Getting to Know the Wireless-B Ethernet Bridge

The Back Panel

All connections to the Bridge are made through the ports in its back panel, shown in Figure 3-1.

Figure 3-1: Back Panel

Reset The Reset button resets the Bridge to its factory default settings.
X-II The X-II (MDI/MDI-X) slide switch offers a choice between two settings. Use the X setting if you
are connecting the Bridge to a network adapter. Use the II setting if you are connecting the
Bridge to a hub or switch.
LAN The LAN port is where you will connect the Ethernet network cable.
Power The Power port is where you will connect the power adapter.
Chapter 3: Getting to Know the Wireless-B Ethernet Bridge
The Back Panel
Important: Resetting the Wireless-B Ethernet
Bridge will erase all of your settings (WEP
encryption, wireless settings, etc.) and replace
them with the factory defaults. Do not reset the
Wireless-B Ethernet Bridge if you want to retain
these settings.
6