Tuning
to preset
stations
You can tune the preset stations by either of the
following two ways.
Scanning
the preset
stations
1 Press TUNER.
The last received station is tuned in.
2 Press PRESET TUNING + or PRESET
TUNING - repeatedly
to select the
preset station you want.
Each time you press the button, the receiver
tunes in one preset station at a time, in the
corresponding order and direction as
follows:
Using
the preset
codes
Use the supplied remote to perform the
following operations. For details on the buttons
used in this section, see pages 3743 for remote
FW-PP411 and pages 44-47 for remote
RMU306.
1
Press TUNER on the remote.
The last received station is tuned in.
2
Press SHIFT to select a memory page
(A, B, or C), then press the preset
number of the station you want using
the numeric buttons.
33"s