Sony HT-6500DP Operating Instructions Manual page 29

Fm stereo fm/am receiver
Table of Contents

Advertisement

Initial
settings
Parameter
{@ -$$f BAL. L/R XXX*
CTR XXX dB*
initial setting
-
BALANCE
OdB
SUR.L. XXX dB*
OdB
SUR.R. XXX dB*
OdB
SW. XXX dB*
L.F.E. XXX dB
OdB
OdB
lo: ,&i&2> COMP. XXX
S""....
OFF
* The parameters can be adjusted separately for
MULTI CH IN (HT.6500DP and HT.5500D only).
Front
balance
({a
:@ BAL. L/R
XXX)
Lets you adjust the balance between front left
and right speakers.
Center
level
(CTR XXX dB)
Lets you adjust the level of the center speaker.
Surround
left level
(SURL.
XXX dB)
Lets you adjust the level of the surround left
speaker.
Surround
right
level
(SURR.
XXX dB)
Lets you adjust level of the surround right
speaker.
Sub woofer
level
(S.W. XXX dB)
Lets you adjust the level of the sub woofer.
LFE (Low
Frequency
Effect)
mix
level
(L.F.E.
XXX dB)
Lets you attenuate the level of the LFE (Low
Frequency Effect) channel output from the sub
woofer without effecting the level of the bass
frequencies sent to the sub woofer from the
front, center or surround channels via the
Dolby Digital or DTS bass redirection
circuitry.
For LEE mix level, "0 dB" outputs the full LFE
signal at the mix level determined by the
recording engineer.
To mute the sound of the LFE channel from the
sub woofer, select "OFF'. However, the low
frequency sounds of the front, center, or
surround speakers are output from the
sub
woofer according to the settings made for each
speaker in the speaker setup (pages 15-19).
Dynamic
range
compressor
(-G
&GE'+
*sv*v.*
COMP. XXX)
Lets you compress the dynamic range of the
sound track.
This
may be useful when you want
to watch movies at low volumes late at night.
We recommend using the "MAX"
setting.
To reproduce the sound track with no
compression, select "OFF".
To reproduce the sound track with the dynamic
range intended by the recording engineer, select
"STD.
To compress the dynamic range in small steps
to achieve the sound you desire, select "O.l"-
"0.9".
To reproduce a dramatic compression of the
dynamic range, select "MAX".
Note
Dynamic
range compression is possible with Dolby
Digital sources only.
continued
2gus

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ht-5500dHt-17000

Table of Contents