Normal Display (N) - Gira 1186 Mounting Instructions And Commissioning

To improve clarity the respective character listed above is displayed in the
top left of the display. The corresponding value is displayed on the right
in the four large numerals.
The respective parameter is opened for modification when the S button
is pressed. The parameter value is displayed flashing.
When a parameter has been modified and confirmed with S, the
parameter menu changes automatically to the next parameter.
The P button can be used at any time to return to the normal time pro-
gram.
i
Modifications in the parameter menu
Modifications in the parameter menu are implemented immediately!
The parameter is regarded as modified, irrespective of whether the
menu is exited with S or P or whether the system returns automat-
ically to the normal display after 1 minute.
6

Normal display (n)

This parameter is used to select the normal display of the radio room tem-
perature sensor. This information is always displayed on the display
whenever no menu has been selected and no holiday settings are active.
1. The + and - buttons can be used to change to one of the operating
modes listed below.
2. S activates it.
Normal display
Current time of day
Current setpoint temperature SOLL
Current actual temperature
* Factory setting
Normal display with other function
During operation with the radio controller, the set value is permanently
displayed with activated setpoint offset of the set value, regardless of the
selected normal display. As soon as the setpoint offset is cancelled, the
selected normal display appears again.
Display
Uhr (Clock) *
Ist