Touch Sensor 2 plus
GIRA
Info
Installation Instructions
Touch Sensor 2 plus
2-channel
3-channel (1+2)
6-channel (2+4)
Contents
1.
Function
2.
Display window
3.
Configuration
4.
Locking of functions
5.
Room temperature controller
5.1
Modes of operation
5.2
Heating and cooling
5.3
Temperature sensor
6.
Settings
6.1
Programming mode
6.2
Heating timer
6.3
Automatic functions
7.
Anti-theft protection
8.
What's to be done when ....
9.
Acceptance of guarantee
1. Function
Touch sensor function (1)
Each key separately programmable for: switching •
toggling • dimming (single- or double-sided operation)
• transducer • blind / shutter control • recalling light-
scapes • storing lightscapes • status indicator LED •
illumination of inscription lable • selection of controller
operating mode • presence button
Room temperature controller function (2)
Heating / cooling mode • comfort mode • stand-by
mode • nighttime mode • frost / heat protection • com-
fort mode extension • controller / controller actuation
lockable • 24-h-display (only with KNX/EIB-DCF77
clock) • 2-stage heating / cooling • display of actual,
reference and outside temperature • heating timer
Other functions: alarm function (anti-theft protection)
• locking of individual or of all key functions
Touch Sensor 2 plus
Safety Instructions
Attention: Electrical equipment must be installed
and fitted by qualified electricians only.
Non-observance of these warnings may damage
the device and cause fire or other hazards.
Observe the fitting instructions.
5/07
Order no.: 2052 xx
Order no.: 2053 xx
Order no.: 2056 xx
Page 1 of 9