Rear View And Part Names - Eneo VKC-1422 Installation And Operating Instructions Manual

3. Rear View and Part Names

() Function Setup
Button
(6) Control Terminal
1. Function Setup Button
Functions can be setup using 5 buttons on the camera's rear panel.
2. VIDEO OUT Jack
Used to connect an external video monitor in jack
3. Power LED
The LED turns on when power is supplied.
4. Selection Switch
When the distance is far from camera to monitor, set „Selection Switch" in  or 3.
It shows more clear video on the monitor.
5. POWER Input Terminal
6. Control Terminal
• MENU Buttons: Used to access menu mode.
Also used to escape menu mode.
• TELE/WIDE Buttons: Used to choose the desired menu item.
It also moves the cursor up or down in the menu screen.
• NEAR/FAR Buttons: Used to change the parameter of the
selected menu item. It also moves the cursor the left of right
in the menu screen.
36
() Video Out Jack
(3) Power LED
(4) Selection Switch
(5) Power Input Terminal