Maintenance And Service - Bosch GSR Professional Original Instructions Manual

Hide thumbs Also See for GSR Professional:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 18
OBJ_BUCH-690-003.book Page 27 Thursday, August 28, 2008 9:04 AM

Maintenance and Service

Maintenance and Cleaning
Before any work on the machine itself (e. g.
maintenance, tool change, etc.) as well as
during transport and storage, remove the
battery from the power tool. There is danger
of injury when unintentionally actuating the
On/Off switch.
For safe and proper working, always keep
the machine and ventilation slots clean.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
Replacing the Carbon Brushes (see figure H)
The power tool stops automatically when the
carbon brushes are used. For replacing the car-
bon brushes, loosen the two screws in the cover
lid 17 and take off the cover lid 17. Place a
screwdriver or a similar tool into the clip of the
brush holder 16 and lever it out with caution.
Take out the used brushes and replace them.
The new brushes can also be mounted turned by
180 degrees. Press the mounted brushes slight-
ly down until they engage audibly. Then replace
the cover lid 17 again.
Bosch Power Tools
After-sales Service and Customer As-
sistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer consultants answer your ques-
tions concerning best buy, application and ad-
justment of products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: SPT-Technical.de@de.bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
2 609 932 662 | (28.8.08)
English | 27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gsb professional

Table of Contents