Network Component Configuration - Linksys USB200HA User Manual

Network Component Configuration

1. Once you are back at the Windows 98 Desktop, click on your Taskbar's
Start button, then Settings, then Control Panel, then double-click the
Network icon.
2. When the Network window appears, click on the Configuration tab. A
window like the one below will appear. There may be extra components
listed in addition to the ones listed below, which is normal.
• Client for Microsoft Networks
• Linksys Phoneline 10M USB Network Adapter
• IPX/SPX-compatible protocol
• NetBEUI
• TCP/IP
If any of the components shown above are missing, you must manually
install them. See the section Manually Installing Network Components in
Windows 98 on page 33 for instructions.
12
Linksys HomeLink™ Series Phoneline 10M USB Network Adapter
3. Click the File and Print Sharing button to bring up the File and Print
Sharing window.
4. If you want to give others access to files on your PC's hard drive,
select I want to be able to give others access to my files.
5. If you'd like to share your printer with other users on the network,
select I want to be able to allow others to print to my printer.
N N o o t t e e : : If you do not enable File and Print Sharing, your PC will be
invisible on the network and inaccessible to other network users.
6. Click OK. File and Printer Sharing for Microsoft Networks now
appears in the list of installed components.
7. After making sure that all the listed network components are installed
on your system, select Client for Microsoft Networks in the Primary
Network Logon field.
13