Installing Device Drivers; Installing The Driver For The 4-In-1 Media Card Reader; Installing The Driver For Usb 3.0 On The Windows 7 Operating System; Installing The Thinkpad Monitor File For - Lenovo ThinkPad Edge E145 User Manual

Installing device drivers

The device drivers are available at
http://www.lenovo.com/Drivers. Click your computer product name to view all the device drivers for your
computer.
Attention: Always go to http://www.lenovo.com/Drivers for the latest device drivers. Do not download
them from the Windows Update Web site.

Installing the driver for the 4-in-1 media card reader

To use the 4-in-1 media card reader, you need to download and install the Realtek Card Reader Driver from
the Lenovo Support Web site at:
http://www.lenovo.com/support

Installing the driver for USB 3.0 on the Windows 7 operating system

If your computer supports USB 3.0, and you have reinstalled the operating system, you need to download
and install the USB 3.0 driver to use the USB 3.0 by doing the following:
1. Go to http://www.lenovo.com/support. Find your model and display the driver links.
2. Select the USB 3.0 driver for the 32-bit or 64-bit operating system and extract it to your local hard
disk drive.
3. Double-click the Setup.exe file in the C:\DRIVERS\WIN\USB3.0\ directory.
4. Click Next. If the device driver is already installed, click Cancel. Follow the instructions on the screen
until the installation is finished.
Installing the ThinkPad monitor file for Windows Vista/7 on the Windows
7 operating system
The ThinkPad monitor file for Windows Vista/7 is in the following directory:
C:\SWTOOLS\DRIVERS\MONITOR
Note: If you cannot find this directory on your hard disk drive, download the ThinkPad monitor file for
Windows Vista/7 from the ThinkPad Web site at:
http://www.lenovo.com/Drivers
Note: Before you install this file, make sure that the correct video driver has been installed.
1. Right-click on the desktop, and click Personalize.
2. Click Display at the left.
3. Click Change display settings.
4. Click Advanced Settings.
5. Click the Monitor tab.
6. Click Properties.
7. Click the Driver tab.
8. Click Update Driver.
9. Select Browse my computer for driver software, and then click Let me pick from a list of device
drivers on my computer.
10. Click Have Disk.
11. Specify path C:\SWTOOLS\DRIVERS\MONITOR to this monitor INF file. Then, click Open.
12. Click OK.
.
Chapter 7 Advanced configuration
81