Lenovo ThinkPad Edge E145 User Manual page 85

2. Close the computer display, and turn the computer over.
3. Remove the battery. See "Replacing the battery" on page 61.
4. Loosen the screws 1
5. Open the latches on both sides of the slot at the same time
Save the removed memory module for future use.
6. Place the notched end of the new memory module toward the contact edge side of the memory slot
and insert the memory module
module downward until it snaps into place
the slot and cannot be moved easily.
, and then remove the cover
1 into the slot at an angle of about 20 degrees. Pivot the memory
2
2 .
1
, and then remove the memory module
. Ensure that the memory module is firmly installed in
.
Chapter 6 Replacing devices
2
.
69