Windows 2000 Installation & Setup; Overview; Installing The Usb Network Adapter's Driver; Troubleshooting - Linksys USB100TX User Manual

Windows 2000 Installation &
Setup

Overview

After physically installing the EtherFast 10/100 USB Network Adapter in
your computer, follow these instructions to install the network driver. The
installation procedure for the network driver could vary slightly depending on
which version of Windows 2000 you are using, and on your current system
configuration. If at any time during the installation you encounter problems,
consult the Troubleshooting section.
Installing the Network Adapter's Driver
1. If you haven't already, start your computer and boot Windows 2000.
2. Windows will display the Welcome to the Found New Hardware Wizard
box. Click Next.
29
Linksys EtherFast Series
®
10/100 USB Network Adapter
3. The Install Hardware Device Drivers dialog box will appear. When
Linksys USB Adapter is displayed, select "Search for a suitable driver for my
device (Recommended)". Click Next.
4. The Locate Driver Files dialog box will appear. Select the "Specify a
location" option and insert the Driver Disk into your floppy drive. Click
Next.
5. In the field under "Copy manufacturer's files from" on the next screen,
type "A:\WIN2000" and click OK.
30