Parts List; Hardware List - Masterbuilt MB10 Manual

ASSEMBLY INSTRUCTIONS
BOLT TOGETHER MB15

PARTS LIST

ITEM NO. QUANTITY DESCRIPTION
1 1 Cooker Head
2 3 Legs
1
Security Ring
A
2
Windshield
COOKWARE PARTS LIST
ITEM NO. QUANTITY
1
2
3
4
2
1
WARNING
If oil starts to smoke TURN BURNER OFF. This means the oil has exceeded 400ºF (200°C) and
could catch fire. Allow oil to cool to 350ºF (177°C) before relighting burner.
When cooking with oil ALWAYS turn off burner before lowering food into oil.
Relight after food is submerged into the oil.
DO NOT TURN BURNER TO A LOW SETTING TO KEEP OIL/GREASE HOT FOR LATER USE.
THE TEMPERATURE OF THE OIL/GREASE WILL CONTINUE TO RISE AND CATCH FIRE.
7

HARDWARE LIST

(A)
M6X10
Phillips Flange Screw
STEP 1 Mounting Legs
Place leg (2) inside windshield. Attach leg to
windshield and security ring using screws (A).
Mount burner as shown in Step 1 on page 6.
DESCRIPTION
1 6'' Thermometer with Clip
1 10.5 Qt Aluminum Pot
1 Fry Basket
1 Fry Basket Handle
3
4
#1
Yellow
Our
Flame
When the cast iron burner burns yellow or not at all, what do i do?
If your burner does not burn, blows out, burns yellow, or there's a flame inside the venturi, you need to
check the burner venturi for any obstructions. Dirt dobbers, spiders and other insects will build a nest
inside the burner venturi blocking air and gas flow.
KEEP AIR SHUTTER CLOSED AFTER EACH USE.
How To Clean
1. Remove the hose from the burner using a 7/16" wrench.
2. Insert a small rod in the hole that the hose was removed from.
3. Hold the burner up to a light looking into the hole that the hose was
removed from to see any obstructions.
4. If burner has not cleared, flush with water.
5. Once the burner has been cleared, reassemble the burner (air shutter, spring, hose.) See page 6
When a flame occurs inside the venturi this is caused by a blockage and could cause damage to the
hose assembly.
REMEMBER TO ADD
WASHERS WHEN
REASSEMBLING
THE BURNER
SAFE STORAGE & MAINTENANCE
• Before each use of the appliance, check and clean the burner/venturi tubes for insects and insect
nests. A clogged tube can lead to a fire inside or behind the burner or beneath the appliance.
• Check the regulator, hose, and burner parts, air shutter and venturi section carefully before and after
each use for any sign of wear.
• ALWAYS turn gas OFF at the gas cylinder valve prior to inspecting parts.
• DO NOT obstruct flow of combustion and ventilation. Keep the ventilation opening(s) of the cylinder
enclosure clear of debris. The cylinder supply system must be arranged for vapor withdrawal. Keep
the appliance area clear and free from combustible materials, gasoline and other flammable vapors
and liquids.
• Coat cooker stand with cooking oil after unit has cooled, to prevent rust.
• ALWAYS allow your appliance to cool completely before handling.
• When appliance is not in use, gas must be turned off at the supply cylinder.
• ALWAYS disconnect gas cylinder after using appliance.
• Clean appliance with cleaning agents.
• ALWAYS cover and store appliance in a protected area.
• Cylinders must be stored outdoors out of the reach of children and must not be stored in a building,
garage or any other enclosed area.
• Always store gas cylinder upright and in areas where temperatures won't exceed 125°F (51°C), and
Do Not store a spare cylinder on, or near, cooker stand, or place connected gas cylinder under
cooker stand. Always keep gas cylinder 20 in (50cm) away from cooker stand.
• Indoor storage of appliance is permissible only if the cylinder is disconnected and removed.
• If any rusting occurs, use steel wool to clean or buff the affected area.
• The exterior of your appliance may be touched up by using a high temperature-resistant paint.
Asked Question
Flame
Venturi
Washers
No
12