Chapter 6: Using The Setup Utility Cd-Rom; Overview; Running The Installshield Wizard - Linksys Instant PowerLine PLEBR10 User Manual

Chapter 6: Using the Setup
Utility CD-ROM

Overview

To begin installation of the EtherFast 10/100 Bridge or USB Adapter, you will
use the Setup Utility CD-ROM to run the InstallShield Wizard. When
installing the USB Adapter, you must run the Setup Utility CD-ROM on the PC
that will be connected to the Adapter.

Running the InstallShield Wizard

1. Insert the Setup Utility CD-ROM into the computer's CD-ROM drive. The
Setup Utility CD-ROM should run automatically. If it does not, click the
Start button and choose Run. In the box that appears, enter D:\setup.exe
(if "D" is the letter of your CD-ROM drive).
10
Instant PowerLine
Figure 6-1
Series EtherFast
TM
2. When you see Figure 6-2, click the Next button to continue.
3. Enter your User Name and Company Name. Select Anyone who uses this
computer (all users) to install a shortcut to the Security Configuration
Utility on every user's desktop (This selection is not available for Windows
98 and ME users). Then click the Next button to continue.
10/100 Bridge and USB Adapter
®
Figure 6-2
Figure 6-3
11