Advertisement
How to install the earbuds:
To Enjoy better sound quality, or to fit your ears, change the size of earbuds or adjust the earbud position to
fit comfortably and snugly in your left and right ears separately.
When you change the earbuds, turn them to install firmly on your headphone to prevent the earbud from
detaching and remaining in your ear.
To prevent headset from falling off your ears.
adjust the ring on the neckband before placing headset on your ears.
Charging the battery:
Charging the headset by USB charging cable ( included in the package)
The LED lamp is lit red while the battery is charged.
The LED lamp is lit blue when the battery is fully charged.
It takes around 25 minutes to fully charge the battery
1.
Connect the USB charging cable to the unit
2.
Connect the USB charging cable to your PC
* when the battery power is nearly used up, a beeping alarm will sound, with the LED lamp blinking red.
After a while, product will turn off
* It is not possible to use the product during charging.
Pairing the product with your device at first time use:
1. Hold "Function key" for around 7 seconds, a signal will sound 'Do re mi fa so" keep pressing until red
& blue light are flashing, means it is ready to be paired.
2. At this first time to pair, use your device to search the product model "PWBH18".
3. When your device searches the product model, press to connect, your device will show if it is
successfully connected or not.
4. If it is successfully connected, you can play music through the product.
Noted: Terminate any connection between the product and any device before starting the paring procedure.
The pairing procedure cannot be started while a Bluetooth connection is established between the product and a registered device. Terminate the connection and
turn off the product.
Advertisement
