Linksys EtherFast PCM100 v2 User Manual page 26

Starting Over in Windows 95 and 98
If you experience installation difficulties, you may need to re-install all of the
Windows networking components from scratch. The instructions below
explain how to give your PC a clean sweep so that you can start the EtherFast
Card's software installation over.
1. At the desktop click on the Start Button, highlight Settings, click on
Control Panel.
2. Double-click on the Network Icon.
3. If the Configuration box has a component called Dial-Up Adapter, skip
forward to step 5. If it doesn't, continue with step 4.
N N o o t t e e : : Screen shots are for demonstra-
tion purposes only. Actual product and
adapter names may vary depending on
which product you are installing.
46
Instant EtherFast Series
®
EtherFast 10/100 PC Cards
®
4. Remove any instance of the name Linksys in the box. This includes
IPS/SPX...Linksys, NetBEUI...Linksys, and TCP/IP...Linksys. Also
remove Client for Microsoft Networks, Client for NetWare Networks, and
File and Printer Sharing for Microsoft Networks.
N N o o t t e e : : Linksys does not provide technical sup-
port for TCP/IP configuration or troubleshooting.
In some cases, removing one of these components may in turn automatically
remove other components as well. If this happens, skip ahead to step 6.
5. For PCs with Dial-Up Networking and/or an AOL adapter, remove any
instance of the name Linksys, all IPX/SPX protocols, all NetBEUI, all
Clients, and File and Printer Sharing for Microsoft Networks. Do not
remove Dial-Up Adapter, AOL Adapter, TCP/IP-Compatible Protocol-
AOL Adapter or TCP/IP-Compatible Protocol-Dial-Up Adapter.
6. When you are done removing all the unnecessary components, click OK.
When asked to restart, click No.
47