Viewing Altitude Records - Casio 5463 Operation Manual

Viewing Altitude Records

You can use the Data Recall Mode to view manually saved record data and auto save values.
To view altitude records
1. Use B to select the Data Recall Mode (RECALL) as shown on page E-30.
• About one second after RECALL appears on the display, the display will change to show the fi rst
record of the memory area you were viewing when you last exited the Data Recall Mode.
2. Use A and C to scroll through the screens for an area and display the one you want.
E-80
• Manually saved records (REC01 to REC30) and auto save MAX and MIN values all include the
date (year, month and day) and time (hour and minute) that the data was recorded.
• Records of the ASC and DSC include altitude values along with the date (year, month, day) that
the data was recorded.
• For details about auto save values, see "Auto Save Values" (page E-62).
• ---- will be displayed if MAX/MIN data has been deleted or if there is no corresponding MAX/MIN
data due to error, etc. In such cases, total ascent (ASC) and total descent (DSC) values will show
zero.
• When the total ascent (ASC) or total descent (DSC) exceeds
99,999 meters (or 327,995 feet), the applicable value will restart
from zero.
1s digit 1s digit
10,000s digit 10,000s digit
E-82
Using the Stopwatch
The stopwatch measures elapsed time, split times, and two fi nishes.
Current time Current time 1/100 second 1/100 second
To enter the Stopwatch Mode
Use B to select the Stopwatch Mode (STW) as shown on page E-30.
To perform an elapsed time operation
A
Start
To pause at a split time
A
Hours Hours
Start
Minutes Minutes Seconds Seconds
E-84
Using the Countdown Timer
The countdown timer can be confi gured to start at a preset time, and sound an alarm when the end of the
countdown is reached.
Current time Current time
To enter the Countdown Timer Mode
Use B to select the Countdown Timer Mode (TIMER) as shown on page
E-30.
• About one second after TIMER appears on the display, the display will
change to show the countdown time hours.
To specify the countdown start time
1. Enter the Countdown Timer Mode.
2. Pull out the crown.
• This will cause the current start time minutes digits to fl ash on the
digital display.
Countdown time Countdown time
(Minutes, seconds) (Minutes, seconds)
3. Rotate the crown to adjust the minutes setting.
• To set a starting countdown time of 60 minutes, set 00'00.
4. After the setting is the way you want, push the crown back in.
E-86
Operation Guide 5463
A A
A
Stop (Resume) (Stop)
C A
C
Split Split release Stop
(SP appears on
the digital
display.)
Manual Save 1
2 seconds
Year
Month
Day
Record name
Cumulative
Descent (DSC)
Cumulative recording start
date (year, month, day)
Cumulative descent
To delete all recorded data
1. Use B to enter the Data Recall Mode.
2. Hold down D for at least three seconds. Keep D depressed when CLEAR ALL starts to fl ash on the
display, and release it when CLEAR ALL stops fl ashing (and remains displayed).
• - : - - and -.- - will alternate on the display.
To delete a specifi c record
1. Use B to enter the Data Recall Mode.
2. A and C to display the record you want to delete.
Important!
Note that holding down D for more than fi ve seconds in step 3 will delete all data.
•
• A delete operation cannot be undone! Make sure you do not need data before you delete it.
3. Hold down D. Keep D depressed when CLEAR starts to fl ash on the display, and release it as soon
as CLEAR stops fl ashing (and remains displayed).
• Deleting a record in the manually saved record memory area causes all of the records following it
to be shifted upwards and renumbered accordingly.
To measure two fi nishes
A C
Start Split
First runner fi nishes.
(SP appears on the
digital display.)
Display time of fi rst
runner
C
Note
Reset
• The Stopwatch Mode can indicate elapsed time up to 23 hours, 59 minutes, 59.99 seconds.
• An ongoing elapsed time measurement operation will continue internally even if you change to another
mode. However, if you exit the Stopwatch Mode while a split time is displayed, the split time will not be
displayed when you return to the Stopwatch Mode.
C
Reset
To perform a countdown timer operation
A A
Start Stop
• An alarm sounds for ten seconds when the end of the countdown is reached. This alarm will sound in
all modes. The countdown time is reset to its starting value automatically when the alarm sounds.
To stop the alarm
Press any button.
Manual Save 30
Hour : Minutes
2 seconds
2 seconds
2 seconds
Altitude Altitude
Cumulative
Ascent (ASC)
Cumulative recording start
date (year, month, day)
2 seconds
2 seconds
Cumulative ascent
A C
Stop Split release
Second runner Display time of
fi nishes. second runner
A A
(Resume) (Stop)
High Altitude (MAX)
2 seconds
2 seconds
High altitude
Low Altitude (MIN)
2 seconds
2 seconds
Low altitude
E-81
E-83
C
Reset
E-85
C
Reset
E-87