Table of Contents
Advertisement
• The INTERNET light is green when Internet access is available.
• The PHONE lights stay on when your SIP account is registered and
they blink if the receiver is off the hook.
• The USB light turns on when there is a USB device (printer or
memory stick) connected to the FSG2200HNU and blinks when
transmitting data.
• The CATV light turns on when the FSG2200HNU is connected to
the FTU2000 and the fiber optic cable TV service is active. Refer to
the Quick Start Guide of your FTU2000 for more information.
If no lights are on, check your connections. Make sure that
you have the power adaptor connected to the FSG2200HNU
and plugged in to an appropriate power source. Make sure
the power source is turned on. Turn the FSG2200HNU off,
wait for a few seconds and turn it back on. If the LEDs are
still off, contact your local vendor.
Log into the Web Configurator
1. Open your browser and enter http://192.168.1.1 (the FSG2200HNU's
default IP address) as the address.
6
Advertisement
Table of Contents
