Linksys AM300 Quick Configuration Manual page 4

In the Setup screen, complete the
following steps:
From the Encapsulation drop
1
1
down menu select RFC 2364
PPPoA.
Note: The page will refresh to
include the PPPoA section.
Ensure the VPI is set at 8 and the
2
2
VCI is set at 35 from the Virtual
Circuit ID: field.
Select the VC radio button from
3
3
the Multiplexing field.
From the DSL Modulation: field
4
4
select Auto.
Enter the username in the
5
5
Username field.
Refer to the Settings Page on our
website for the username format.
Enter the password in the
6
6
Password field.
Refer to the Settings Page on our
website for the password format.
Linksys AM300 Quick Configuration
1
2
3
4
5
6
Page 4 of 7