Error Reporting And Removing Error; Quick Start - Simple Slimline Operation - BONAIRE Slimline Owner's Manual

Multi-Appliance Slimline Control
Navigating the Controls
• Fan Mode: In Fan Mode the Fan LED will come on and 'FAN'
will appear on the display. The user can adjust the Fan speed
between 1(Low) and 12(High).
NOTE: Fan speed is only available if digital communication
loom is installed. Please see your Authorised Bonaire
Installer.

ERROR REPORTING AND REMOVING ERROR

While operating the Slimline Controller, an error will be reported by
"Er" on the screen. The Slimline Controller will remain in this state until
the error is removed.
To remove the error,
Press and hold the UP/DOWN buttons for 5 seconds. This will send
the reset command to the appliance.

QUICK START - SIMPLE SLIMLINE OPERATION

Here's all you have to do to get going (if the installer hasn't already
done it for you). Your Slimline Controller is designed to give you simple
operation control over your product. Any changes made to the control
settings will have a 3 second delay before the unit responds.
STEP 1 Turn the Slimline Controller ON by pressing the
ON/OFF button.
STEP 2 Press the MODE button to select different modes of
operation.
STEP 3 Press the UP/DOWN button to adjust the fan speed
or the temperature setting.
(The icon(s) availability will vary according to the
Appliances selected.)
STEP 4 To turn the unit off press the ON/OFF button.
Bonaire Control Systems Page 9