BONAIRE Slimline Owner's Manual page 24

Multi-appliance control for ducted gas central heating ducted evaporative air conditioning
Table of Contents

Advertisement

Multi-Appliance Slimline Control
– Australia
Warranty
Exclusions to warranty
Consumable items subject to wear and tear such as filter pads drive belts and bearings are not
covered by this warranty.
Components used as part of the installation such as grilles filters, ducting, fittings, zone motors and
consumer services pipe work are warranted from your place of purchase and not covered by this
warranty.
Damage caused by elements such as wind, rain, lighting, floods etc along with power spiking and
brownouts are not considered defective material or workmanship and as such are not considered
warranty.
No responsibility will be accepted for outside elements such as pests, animals, pets and vermin that
may cause damage to the unit.
Harsh environmental situations such as salt air that may cause cabinet damage / rusting can not be
considered warranty.
The manufacturer does not accept liability or any claims for damage to building contents, carpet,
walls, ceilings, foundations or any other consequential loss either direct or indirect. Damage
resulting from, power spikes, incorrect operation, incorrect installation, and incorrect maintenance is
also not covered.
All warranties are NOT transferable.
Conditions where warranty may be void
If there is no certificate of compliance for plumbing, electrical or refrigeration as required by State &
Territory Laws. Climate Technologies reserves the right to refuse service on non-compliant
installations.
The defective operation of the appliance that is due to failure of electricity, gas, water or refrigerant
gas supplied.
Defects are caused by neglect, incorrect application, abuse or by accidental damage of the
appliance.
An unauthorised person has attempting to repair the appliance.
A situation arises referenced in the trouble-shooting guide.
A charge will be made for work done or for a service call where there is nothing wrong with the
appliance.
Aged New Product Warranties
For a New Product warranty to apply, a product needs to be sold and installed within 3 years of the
manufacturing date.
Product that is aged as the result of extended storage or being used for demonstration purposes, the
following warranty will apply.
For a product that is greater than 3 years and less than 5 years old from date of manufacture the
statutory warranty will apply and any voluntary warranty originally supplied will be reduced by 1
year
For a product that is greater than 5 years of age from date of manufacture, the statutory warranty
will apply to electrically functioning components only. All other components being cabinets, louvres,
filters etc. will not be covered by warranty.
Bonaire Control Systems
Page 24

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for BONAIRE Slimline

Table of Contents