Table of Contents
Advertisement
43
Provincial Road n.78 Km 12.150
33050 Mortegliano (UD) – Italy
Tel. +39.(0)432.992482 – +39.(0)432.993557
Fax +39.(0)432.931280
Sito web:
www.flysynthesis.com
e-mail:
info@flysynthesis.com
TYPE
Check the fuel lines in the engine compartment for
condition and secure attachment. Replace if necessary.
Check the auxiliary electric fuel pump. Remove and
clean the fuel filter.
Check throttle and choke control cables for proper
installation,
equipment. Full free smooth movement. Clean and
lubricate the cables
Check the carburettors for leaks and proper adjustment,
clean if necessary.
Clean the carburettors
Replace or clean the air filter per ROTAX instructions.
Inspect carburettor-mounting flange for leakage.
Replace carburettor-mounting flanges.
Using a 10X magnifying glass inspect all welding of the
engine mount for cracks. Check for distortion.
Check for proper torque of the nuts securing the engine
to the engine mount. Torque required: Nut (6) 8Nm ;
Nut (8) 22Nm.
Check for proper torque the self-locking nuts securing
the Engine mount to fuselage
Check for proper torque the self-locking nuts securing
the Shock absorbers to the engine mount and supporting
plate of shock absorber to firewall.
Check the nuts securing the exhaust pipe to cylinder.
Check all exhaust system for gas leaks, cracks, and
serviceability of retaining spring and rubber buffers.
Check security of oil tank attachment to the frame and
Mount. Exhaust muffler oil radiator and cooling radiator
To mounting.
Check and if necessary replace all oil hoses and cooling
system hoses, check clamps for Security and condition.
Check
retained well to all electrical system wiring in the engine
Compartment.
Check cooling liquid level and add if required.
Drain and Replace cooling liquid.
Check oil level, add if required
Drain and change oil
Check engine for leaks.
Check engine cowling for proper condition & security.
Check all fuel and oil hose connection for security.
Check cooling hoses and expansion tank for security
Check all components attached to fire wall for security.
Maintenance Manual
FLY SYNTHESIS TEXAN
TOP CLASS 580 ISR
(For Rotax 912 ULS
versions)
TASKS TO BE PERFORMED
tension
and
that all connection to terminals is firm and
Interference
with
Identification:
MM_TC_580_Rev.2
Page:
Date:
Issued:
Verified:
Approved:
Revision Description:
Placard update
O
O O
O O O O
O
O O
other
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
O
O O
X
X
X
X
X
X
X
X
X
X
X
X
O O
X
X
X
X
O
O O
O
O O
O
O O
O
O O
O O O O
43 of 77
15/02/11
C. Cosatto
C. Cosatto
C. Cosatto
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Texan top class 580 ISR and is the answer not in the manual?