Specifications - Decware SE84C Owner's Manual

SPECIFICATIONS

•
Weight
•
Dimensions
•
Circuit type
•
Power output
•
•
•
•
Input voltage
•
Noise / Hum
•
Response
•
Feedback
•
Rectification
•
Output tubes
•
Signal tube
•
Transformers
•
Biasing
•
Resistors
•
Signal Cap
•
Filter Caps
•
AC cord
•
Consumption
•
Input jacks
•
Output jacks
•
Speaker dB/1w
•
Warranty
13 lbs. ea.
8.5" H x 7.250" W x 14.0" D
Single ended Class A Triode
2.3 watts RMS into 4 ohms
5 watts RMS into 8 ohms when bridged
NOTE: Power increases as ohms decrease
Stable into 1 ohm speaker loads
2.0 volts for full output
Less than 1.5 millivolts (amazing for tube gear)
20 Hz ~ 20 kHz
ZERO negative feedback used
5U4G tube rectification
SV83, 6P15P-EV, 6n15n-EB or EL84/6BQ5
6N1P or 6922 or 6Dj8
All transformers are custom made for this amplifier by Decware
Self-Biasing circuit - never needs adjustment
All resistors are precision WW/MF by DALE, VISHAY
Film and Foil
All filter caps are US made SPRAGUE/ATOM
Fused IEC connector provided with removable power cord
65 watts at full power
RCA type 24K Gold / Teflon
Gold 5-way binding posts accept 8 gauge wire
89 dB minimum / 96 dB is ideal
Lifetime to original owner / 90 days on tubes