Advertisement
INSTALLATION
•Connect HDMI input port on transmitter to the signal source equipment
such as DVD player.
•Connect the 2x CAT5e/6/7 output of the transmitter with 2 CAT5e/6/7
cables to the CAT5e/6/7 inputs of the receiver.
•Connect to the IR blaster cable (not included in the package) for IR signal
transmission. Place the IR blaster in direct line-of-sight of the equipment to
be controlled.
•Plug the 5VDC power supply into the unit and connect the adaptor to
AC outlet.
•Connect HDMI input port on receiver to HDMI displays.
•Connect to the IR receiver cable (not included in the package) for IR
signal reception. Make sure that the remote being used is in direct
line-of-sight of the IR receiver.
•Plug the 5VDC power supply into the unit and connect the adaptor to
AC outlet.
CONNECTION DIAGRAM
DC 5V
HDMI Source
IR Channel
30 M Extension Over 2 x CAT5e/6/7
08 08
PLAY
DC 5V
Cat5e/6/7-1
Cat5e/6/7-2
Advertisement
