Advertisement
INSTALLATION
•Connect HDMI input port on transmitter to the signal source equipment
such as DVD player.
•Connect the HDBase-T output of the transmitter with a CAT5e/6/7 cable
to the HDBase-T input of the receiver.
•Connect one of the network input with a Cat5e/6/7 cable to a router and
the rest three as output for PC for online use.
•Connect IR blaster cable (not included in the package) for signal transmission.
Place the IR blaster in direct line-of-sight of the equipment to be controlled.
•Plug the 5VDC power supply into the unit and connect the adaptor to
AC outlet.
•Connect the HDMI output of the receiver to the displays.
•Connect IR receiver cable (not included in the package) for signal reception.
Place the IR receiver indirect line-of-sight of remote.
•Plug the 5VDC power supply into the unit and connect the adaptor to
AC outlet.
CONNECTION DIAGRAM
HDBase-T
DC 5V
DC 5V
HDBase-T
HDMI IN
100Base-T
100Base-T
HDCP Link Mode Power
IR-RX IR-TX
100 M Extension Over HDBase-T
Router
DC 5V
DC 5V
HDBase-T
08：08
PLAY
HDMI IN
100Base-T
100Base-T
HDCP Link Mode Power
IR-RX IR-TX
Advertisement
