4.14 Sharp Color LCD
4.14.1 Disassembling the Sharp Color LCD
1.
Remove the Display Mask as described in Section 4.12.
2.
Remove the two M2.5x4 Screws securing the DC-DC Converter Board (Figure 4-37).
Disconnect the cables from the top and the bottom of the DC-DC Converter Board.
3.
Remove the three M2.5x4 Screws securing the FL Inverter Board (Figure 4-38).
4-36
Figure 4-37 Removing the DC-DC converter board
Figure 4-38 Removing the FL inverter board screws