ViewSonic PJD6350 User Manual page 61

Function
Allows you to select which logo screen will be displayed
Splash Screen
during projector start-up.
See
Screen Capture
details.
My Button
Sets a hotkey on remote control.
Pattern
The projector can display several test patterns. It helps you
adjust the image size and focus and check that the projected
image is free from distortion.
Message
Advanced
Selecting On displays the current information on the screen
when the projector is detecting or searching for a signal.
Presentation Timer
See
High Altitude
A mode for operation in high altitude areas. See
your own startup screen" on page 37
Mode
Enables or disables the DCR (Dynamic Contrast Ratio)
function. Selecting On enables the function and the
projector will automatically switch the lamp mode between
normal and economic modes according to the input image
detected.
DCR
Audio Settings See
Description
"Creating your own startup screen" on page 37
"Setting the presentation timer" on page 35
This function is only available when a PC input signal
is selected.
After enabling DCR, frequent lamp mode switching
may shorten lamp life and noise level will vary during
operation.
"Adjusting the sound" on page 45
54
for
for details.
"Creating
for details.
for details.