ViewSonic PJD6350 User Manual page 60

Function
Power Saving
See
Auto Power Off
Sleep Timer
See
Selecting Enable enables you to restart the projector
immediately within 120 seconds after turning it off. After 120
seconds, if the projector is not turned on again, it will directly
enter the standby mode.
Smart Restart
Selecting Enable enables the function and the projector will
not enter the cooling process after being shut down. Selecting
Disable disables the function and the projector will enter
normal cooling process after being shut down.
Quick Power
Off
Sets the language for the On-Screen Display (OSD) menus.
Language
See
Projector
See
Position
Menu Display Time
Sets the length of time the OSD will remain active after your
last key press. The range is from 5 to 30 seconds in 5-second
Menu Settings
increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Blank Timer
See
Description
"Setting Power Saving" on page 59
"Setting Sleep Timer" on page 59
It takes some time to initiate this function. Make sure
the projector has been turned on for more than 4
minutes. If the projector is resumed by using the Smart
Restart feature, this function can be executed
immediately.
When Enable is selected, the Quick Power Off function
will be automatically set to "Enable".
If you attempt to restart the projector right after it's been
turned off, it may not be turned on successfully and will
rerun its cooling procedure.
When Disable is selected, the Smart Restart function
will be automatically turned off.
"Using the menus" on page 24
"Choosing a location" on page 12
"Hiding the image" on page 36
53
for details.
for details.
for details.
for details.
for details.