Asus B85M-G Manual page 68

2.8.3 Bootup NumLock State [On]
[On]
[Off]
2.8.4 Wait for 'F1' If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
2.8.5 Option ROM Messages [Force BIOS]
[Force BIOS]
[Keep Current]
2.8.6 Interrupt 19 Capture [Disabled]
[Enabled]
[Disabled]
2.8.7 Setup Mode [EZ Mode]
[Advanced Mode] Sets Advanced Mode as the default screen for entering the BIOS setup
[EZ Mode]
2.8.8 CSM (Compatibility Support Module)
Allows you to configure the CSM (Compatibility Support Module) items to fully support the
various VGA, bootable devices and add‑on devices for better compatibility.
Launch CSM [Enabled]
[Auto]
[Enabled]
[Disabled]
The following four items appear when you set Launch CSM to [Enabled].
Boot Device Control [UEFI and Legacy OpROM]
Allows you to select the type of devices that you want to boot up. Configuration options:
[UEFI and Legacy OpROM] [Legacy OpROM only] [UEFI only]
Boot from Network Devices [Legacy OpROM first]
Allows you to select the type of network devices that you want to launch. Configuration
options: [Legacy OpROM first] [UEFI driver first] [Ignore]
2‑38
E9884_B85M-G_v4_Manual.indb 38
Sets the power‑on state of the NumLock to [On].
Sets the power‑on state of the NumLock to [Off].
The third‑party ROM messages will be forced to display during the boot
sequence.
The third‑party ROM messages will be displayed only if the third‑party
manufacturer had set the add‑on device to do so.
Allows the option ROMs to trap Interrupt 19.
Disables this function.
program.
Sets EZ Mode as the default screen for entering the BIOS setup program.
The system automatically detects the bootable devices and the add‑on
devices.
For better compatibility, enable the CSM to fully support the non‑UEFI
driver add‑on devices or the Windows
Disable the CSM to fully support the Windows
Security Boot.
UEFI mode.
®
Security Update and
®
Chapter 2: Getting started
2014/11/4 11:09:58