Cleaning Hepa-Filter - Hyundai H-VC1083 Instruction Manual

Cleaning HEPA-filter

Open a front cover by pressing the button situated at the front of the housing, lift the cover and take out the HEPA-filter from the HEPA niche
(refer to the figures right).
For cleaning the filter use brush and water.
Let the HEPA-filter dry up completely.
Put the HEPA-filter back to the niche and close the cover
Important:
The HEPA should be cleaned twice a quarter, if visibly dusted, it should be cleaned at once
When operation, HEPA should be fit in
Check if the filter piece is fitted improperly or is damaged before use the machine once
Caution:
Never use the appliance without filters.
Do not use a washing machine to rinse filters. Do not use a hair drier to dry them.
Storage
Switch the appliance off.
Remove the mains plug from the wall socket.
Rewind the mains cord by pressing the cord rewind button.
Keep the accessories in the special compartment in the body of the vacuum cleaner. To open the compartment put the
finger into the special niche situated nearby and lift the cover ( refer to the pictures below)
Put the finger into
the niche and lift the
cover
5
Nozzles stored in the
compartment