Unplug the appliance from power supply, when not in use and before servicing. To reduce the risk of electric shock, do not use outdoors or on wet surfaces. To avoid damage of the flexible hose, do not fold or pull it strongly. Do not leave the vacuum cleaner, when plugged in.
Instruction for use Before using the appliance, unwind a sufficient length of cord and insert the plug into the power supply. The yellow mark on the cord shows the ideal cord length. Do not expand the cord beyond the red mark. Press the On/Off button to switch the unit on.
Page 5
recommended to open the cap of bigger diameter for more easy empty the container from refuse, and the HEPA housing could be pulled out from the dust container through the bigger diameter aperture only. To open the cap of less diameter press the release button situated just aside the cap (refer figures 4 and 5).
For cleaning the HEPA-filter, established on the air outlet, take off the rear grill from the unit (please see the figure below) and pull out the HEPA-filter. For cleaning the filter use brush and water Let the HEPA-filter dry up completely. Insert the HEPA-filter back.
Need help?
Do you have a question about the H-VC1086 and is the answer not in the manual?
Questions and answers