Download Print this page
Link electronics DigiFlex 1626 Specification Sheet

Link electronics DigiFlex 1626 Specification Sheet

Analog audio monitor amplifier, 18 watts

Advertisement

Quick Links

LINK ELECTRONICS, INC.
ANALOG AUDIO MONITOR AMPLIFIER, 18 Watts
DigiFlex 1626
MADE IN THE USA
Front Cell Features:
Single Volume control
Selectable Audio Source (Internal, External)
Visible Audio Level Monitoring
Headphone Monitoring Jack
18 Watts of Audio Power Per Channel (peak)
High Common Mode Rejection
Balanced input
Power Limiting Selectable(Single Ended)
Input pad
The 1626 is designed to take an external or an
internal stereo analog audio line level signal and
amplify it to an audible speaker level. The 1626 is a
single module with an accompanying 1018 rear cell
for use with the 1000 series audio products. The
audio source is selected with a front panel toggle
switch.
A single shaft modular pot located at the top of the
1626 module controls the volume. Also, located on
the lower front is a quarter inch phono jack for
monitoring with headphones.
connected to the 1018 screw terminals blocks.
LINK
ELECTRONICS, INC.
1000
1000/2 - Dual Power Supply, Holds 10 Modules
7200
Rear cell Features:
On the rear cell, a balanced output of the frame
audio buss is also available. Further, the 1626 offers
a low power mode that allows limiting the total
speaker output to 5 watts. This could be used to
protect the speakers, to conserve power usage from
the frame, or limit heat build-up.
The external balanced or unbalanced source can be
connected via 1018 rear cell through screw type
terminal blocks. The internal source can be pulled
from the
frame. The incoming signal level (both channels)
can be monitored with the front panel LED level
meter.
All Link products carry a ten-year warranty including
parts and labor. Satisfaction is guaranteed when
The speakers are
using the Professional's Choice Products.
2137 Rust Avenue
Phone 573 334 4433
Mounting Frame Options
- Single Power Supply, Holds 11 Modules
- Mounting Frame, Holds 1 Module
Easily Removed
Balanced External Audio Input
Screw Terminal Connectors
Balanced Input/Output
audio bus inside the DIGIFLEX 1000
Cape Girardeau, MO 63703-7668
FAX 573 334 9255
1000 SERIES DIGIFLEX

Advertisement

loading

Summary of Contents for Link electronics DigiFlex 1626

  • Page 1 LINK ELECTRONICS, INC. ANALOG AUDIO MONITOR AMPLIFIER, 18 Watts DigiFlex 1626 MADE IN THE USA Front Cell Features: Single Volume control Selectable Audio Source (Internal, External) Visible Audio Level Monitoring Headphone Monitoring Jack 18 Watts of Audio Power Per Channel (peak)
  • Page 2: Specifications

    DigiFlex 1626 AUDIO AMPLIFIER, 18 WATTS PER CHANNEL EXTERNAL INPUT: Number: ............One stereo, external Standard: .