Fujitsu PrintPartner 12V Product Description page 66

LT
PW
RF
SM
SP
s v
TR
UL
WU
Character Plotting Commands
AD
CF
CP
DI
DR
DT
DV
ES
FI
FN
LB
Select the line type, or the lengthwise pattern of lines, and the length the
pattern.
Specify the width of the logical pen, or the thickness of lines. The unit of
pen width is determined by the WU command.
Define the raster fill pattern, or fill pattern created by users dot by dot in
matrix.
Symbol mode on/off. Plot the specified character (marker) at each end of
vectors.
Select a logical pen.
Specify the screened vector, or the type of a image pattern imposed on lines.
Transparency mode on/off. With mode on, the background is visible
through blank areas of the foreground.
User-defined line type. Create a type of line which is substituted for a line
type defined by the LT command.
Select the unit of pen width for the PW command.
Define characteristics of the alternate font.
Specify an outline character fill mode and whether or not characters are to be
edged (outlined).
Character plot. Move the logical pen by the specified numbers of character
cells (character spaces and lines).
Set the direction (inclination) of characters relative to the absolute plotter
coordinates.
Set the direction (inclination) of characters relative to the scaling points PI
and P2.
Define a terminator character that specifies the end of printing a character
string in label mode.
Define variable text path. Set the plotting direction of a character string in
90 degrees and set the direction of line feeding.
Extra spaces. Increase or decrease the character spacing and line spacing.
Font primary. Specify the font, to which the font ID is assigned in PCL
mode, as the standard font.
Font secondary. Specify the font, to which the font ID is assigned in PCL
mode, as the alternate font.
Label mode. Plot a character string using the current active font.
5-21