SoftBank 103SH User Manual page 80

78
Connecting Paired Handsfree Devices,
Etc.
In Home Screen, Settings
networks
Bluetooth settings
Bluetooth settings opens.
Tap device
The device is connected.
Accepting Connection Request
Handset automatically accepts connection requests from
paired devices. For unpaired devices, set handset to be
discoverable first; when connection request arrives, follow
onscreen prompt.
・If confirmation appears, follow onscreen instructions.
Wireless &
Bluetooth Connection Operations
®
Unpairing Devices
In Bluetooth settings, Touch & Hold device
(or Disconnect & unpair )
Disconnecting Handsfree Devices, Etc.
In Bluetooth settings, Tap device
Allowing Other Devices to Detect Handset
In Bluetooth settings, Discoverable
・Discoverable turns off automatically after a certain
period of time.
・To change Discoverable timeout time, in
networks, Tap Bluetooth settings
timeout .
Accepting Connection Requests while Connected
to a Device
In Bluetooth settings, Detailed Bluetooth Settings
Multiple connect standby
・ If Discoverable is on (
), handset receives files
regardless of the setting above.
Receiving Files (e.g., Address Book via All File
Transfer)
When file reception request arrives,
files:
In Home Screen, etc., Tap Status Bar
Accept After receiving files, Tap Status Bar
Tap notification Tap file (.vcf)
Enter Handset Code
・If confirmation appears, follow onscreen instructions.
・Received files are saved to SD Card; open them from
Contents Manager.
Sending Single Files (e.g., Address Book)
In Home Screen, Mail/Phone
Book) Touch & Hold contact
Yes ( Yes or No
device
Sending Selected Files (e.g., Address Book)
In Home Screen, Mail/Phone
Book) Send
Select and send Tap contacts (
Yes ( Yes or No if portrait is saved)
device
Unpair
OK
( )
Wireless &
→ Discoverable
ON
appears. To receive
Tap notification
Register of data
OK Tap option
(Address
Send by Bluetooth
if portrait is saved) Tap
(Address
Send by Bluetooth
) Send
Tap