ActionTec GT701AP User Manual page 6

intermittently when there is wireless activity.
Rear Panel
The Access Point has a Power Connector, A LAN (Ethernet) Port, an Antenna Jack,
and a Reset button on its rear panel.
LAN Port
The Ethernet (LAN) port is used to connect the Access Point to a hub or router
with the Gray Crossover Ethernet cable.
Power Port
The Power Port is used to connect the Access Point's Power Adapter.
Antenna Jack
The Antenna Jack connects the Access Point to its antenna.
Reset Button
The Reset button is used to reset the Access Point and restore the factory default
settings.
5