Remote Control - Horizon Fitness Titan XG60 Installation And Operator's Manual

••When the light glows red, it means the unit is in auto defrost mode and clearing the
evaporator coil of any ice buildup.
•4. Remote Indicator Light
••
When the remote indicator light is green, it illustrates the unit is remote mode.
• • While in remote mode, the dehumidifier will use the sensor on the remote control unit. In
this mode, the inlet and outlet of the dehumidifier can be ducted
• • If the light is off, unit sensor is being used
• Remote Control Instructions
Titan Dehumidifiers can be controlled using an optional remote accessory. The Horizon Remote
Control connects to your Titan Series Dehumidifier via a 25' CAT 5 cable. The remote control contains
an integrated sensor which gives you multiple options for remotely controlling your unit, in addition to
monitoring the conditions surrounding the dehumidifier.
One application for the remote control is to install the dehumidifier in one room with the condi-
tioned air ducted into a second room that contains the remote. For example, the dehumidifier could be
installed in a laundry room and ducted into a living room. The remote would then be mounted in the liv-
ing room so the remote sensor can control the humidity and provide easy controls for the user.
Another useful application for the remote control is if the dehumidifier is in area that's difficult to
access on a regular basis. For instance, if your dehumidifier is installed in your crawl space, the remote
could be mounted in your living space or garage. This provides you with an easy way to monitor the de-
humidifier.
1. On/Off (Power)Button
Press the on/off button and the machine will start running (two
beeps). Press the button again to turn the machine off.
2. Up Button / Down Button
Use the Up and Down arrow buttons to adjust the humidity level.
3. Mode
Use the Mode button to switch between dehumidification and a
ducted application.
• The symbol on the display board indicates the sensor on
the remote control is being utilized.
• The symbol on the display board indicates the sensor on the dehumidifier is being utilized.
4. Temperature
Press the temperature button to display the current temperature on the screen. Press the button again to turn off the display.
5. Continuous
Press this button to switch the unit into continuous mode.
6. Drain Pump
Use this button if the unit will not be in use for an extended period of time. Pressing the drain pump button will remove
water from the pump reservoir, so the unit can be safely moved or stored.
will appear on the display to indicate continuous mode.
6